Macrosystem-digital-video HDV-Recorder Manuel d'utilisateur télécharger pdf (Page 9)

8

9

with the arrow up/arrow down keys, and once

you have pressed the Ok key, the recorder

software shall ask you: `Start recording?´

Make sure to select `Yes´ and press the Ok key to

begin recording the video to the hard-drive.

(Pressing the Exit key or selecting `No´ would

return you to the Record Menu.)

If you have accidentally selected an already used

storage bank, the system will warn you about it.

To end the recording, press the `Stop´ key

so that the note `Stop recording?´ appears.

The recording is only stopped once you have

actually conrmed this question by pressing the

`Ok´ key or by again pressing the `Stop´ key.

Note: The two messages `Start recording?´ and

´Stop recording?´ have another meaning than

just security – namely to determine the exact

start and end of the recording.

Alternatively, the recording can also be stopped

by pressing the Play key. After answering

the screen message, the recorded footage is

immediately played back.

Note: Please note that due to technical reasons,

there is a signicant delay between the

recording (processing) the video stream and the

actual playback of the footage on the screen.

When starting or ending a recording, you should

pay attention NOT to the monitor screen of the

HDV-recorder but to the control picture of the

camera.

7.3 The Playback Menu

In this menu, which can be accessed also (if no

other menu is activated) by pressing the Play

key, you can playback the already recorded

video material from the hard-drive.

The Playback Menu shows all thirty storage

banks. You can only select those that are used

(black).

To play, select a bank and press the Ok key. The

video is now played. At the end of the video, it is

automatically started again.

Alternatively, you can play all lms in one go,

after each other. To do this, press the menu item

`Play all lms´ and start playback be pressing the

Ok key. At the end of the last video, the system

starts playing the rst video again.

During playback, you can pause the video

by pressing the Pause key. You can also

slow it down by pressing the Slow key. Use

FastForward to fast forward the video and

FastRewind to quickly rewind the video.

Pressing the Pause, Slow, FastForward or

FastRewind key again or pressing the Play key

again continues to play the video at regular

speed.

To quit playback, press the Stop key and conrm

the screen text `Stop replay?´ by selecting `Yes´

or by again pressing the Stop key.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Commentaires sur ces manuels

Pas de commentaire